HERMA basic - Economic labeler for standard uses
For low-cost labeling solutions
The HERMA basic redefines the technical benchmark in its class. Its performance and market positioning are both excellent reasons for deciding for the market-leading HERMA technology.
Made in Germany, made by HERMA
The HERMA basic has genuine HERMA DNA. The processing quality is the accustomed, familiar high standard expected from HERMA. The HERMA basic is manufactured in the same plant in Germany that produces the globally successful HERMA 500 applicator.
Discover the HERMA basic as a 3D model
- Click on the blue button to load the HERMA basic model.
- Click and drag with the mouse to move the HERMA basic model.
- Scroll with the mouse to zoom.
Reliable, rugged and precise with standard applications
The HERMA basic works at a speed of up to 25 m/min: this can be adjusted using the keypad and display. Its integrated controller means there is no need for an additional switch cabinet. Label sizes can be adjusted from 12 x 12 mm to 160 x 400 mm.
Versatile solution to new challenges
The HERMA basic is fitted with mounting points that are identical to those of the HERMA 500. If special applications or higher speeds are required, it is easy to switch to the more powerful applicators of the HERMA 500 family.
Buy accessories and parts for the HERMA basic applicator in the integrated online shop in the myHERMA portal.
Available label sizes: |
12 x 12 mm to 160 x 400 mm; single-layer and multi-layer labels with a label thickness of up to 1.5 mm |
Max. backing tape width: |
164 mm |
Label roll diameter: |
300 mm (winding: inward/outward) |
Label roll core: |
Core 76 mm (optional: 40 mm, 45 mm) |
Max. speed: |
Adjustable up to 25 m/min |
Label stop accuracy: |
± 0.8 mm |
Clearance: |
300 mm (suitable for integration in printers e.g. hot foil printers) |
Unwinder: |
Mechanical |
Winder: |
Mechanical (regulated) |
Design: |
Left-hand and right-hand version |
Label stop sensor: |
Forked light barrier for non-transparent labels; optional FS03 sensor can be used for transparent labels |
Control panel: |
Keypad with display; languages available: German, English, French, Spanish |
Controller: |
Integrated in the applicator |
IP protection type: |
IP 40 |
Power connection values: |
110 / 240V AC ±10%, 50 / 60 Hz; wide voltage input (automatic adjustment) available power cords: type B NEMA 5-15, 3-pin/ type E+F CEE 7/7 |
Mounting: |
Mounting points identical to those of HERMA 400 |
Label transfer: |
Adjustable: rigid dispensing plate with brush, roller or spring-mounted roller or optional pneumatic pivot beak |
Fault display: |
Shown in the display |
Certification: |
CE conformity |
Contact
Request for quotation
We produce labeling solutions according to your specifications - suitable for your application!
Please take a moment to provide us with some detailed information about your labeling solution requirements on the following page so that we can give you a good consultation.